hondavert-dev/lib/core/protocol/kpro_parser.dart

import 'dart:typed_data';
import 'sensor_state.dart';
import 'temp_table.dart';
import 'neg8.dart';
import 'dtc_map.dart';

/// Parses a 128-byte KPro ECU response frame into a [SensorState].
/// Throws [ArgumentError] if frame length is wrong or NEG8 checksum fails.
SensorState parseKPro(Uint8List frame) {
  if (frame.length != 128) {
    throw ArgumentError('KPro frame must be 128 bytes, got ${frame.length}');
  }
  if (!validateFrame(frame)) {
    throw ArgumentError('KPro frame NEG8 checksum failed');
  }

  // RPM: bytes 2..3 — raw / 4. Little-endian like every other multi-byte
  // field from this adapter (S300 RPM/VSS/MAP confirmed LE live; the KPro
  // table itself labels MAP2 and AFCMD as L/H byte pairs). Was read BE.
  // VERIFY on bench: 2000 rpm must show 2000.
  final int rpmRaw = _readUint16LE(frame, 2);
  final double rpm = rpmRaw / 4.0;

  // VSS: byte 4 direct km/h
  final double vss = frame[4].toDouble();

  // TPS: byte 5 direct %
  final double tps = frame[5].toDouble();

  // MAP: bytes 6 (MAP1) and 33..34 (MAP2 L+H)
  final int map1Raw = frame[6];
  final int map2Raw = _readUint16LE(frame, 33); // MAP2L @33, MAP2H @34
  final double map = (map2Raw != 0) ? map2Raw / 10.0 : map1Raw.toDouble();

  // INJ: byte 11 raw
  final double inj = frame[11].toDouble();

  // IGN: byte 13 raw degrees
  final double ign = frame[13].toDouble();

  // O2: byte 14 raw
  final double o2 = frame[14].toDouble();

  // KRtrd: byte 21
  final int krtrd = frame[21];

  // SW bitmaps
  final int sw1 = frame[31];
  final int sw2 = frame[32];

  // ECT: byte 49. Table is tempXlt[raw] - 40, not +40 — see s300_parser.dart
  // for the reasoning (the declared -40..150 degC sensor range is only
  // reachable with subtraction).
  final double ect = (tempXlt[frame[49]] - 40).toDouble();

  // IAT: byte 50
  final double iat = (tempXlt[frame[50]] - 40).toDouble();

  // PA: byte 51
  final double pa = frame[51].toDouble();

  // BAT: byte 52 — raw / 10
  final double bat = frame[52] / 10.0;

  // STRIM: byte 32 (SW2 shares offset 32, STRIM is byte 20 per spec offset +20)
  final double strim = frame[20].toDouble();

  // LTRIM — not explicitly listed in KPro; use 0
  const double ltrim = 0.0;

  // ETH — not in KPro spec; use 0
  const double eth = 0.0;

  // AFR: byte 25 (AFCMD at offset +19, then raw)
  final double afr = frame[25].toDouble();

  // ERR bytes: 18 bytes starting at offset 0x3E = 62
  final List<int> errBytes = List<int>.generate(18, (i) => frame[62 + i]);

  // AIN0–AIN7: bytes 0x52..0x61 (offset 82..97, uint16 LE each)
  final double ain0 = _readUint16LE(frame, 82).toDouble();
  final double ain1 = _readUint16LE(frame, 84).toDouble();
  final double ain2 = _readUint16LE(frame, 86).toDouble();
  final double ain3 = _readUint16LE(frame, 88).toDouble();
  final double ain4 = _readUint16LE(frame, 90).toDouble();
  final double ain5 = _readUint16LE(frame, 92).toDouble();
  final double ain6 = _readUint16LE(frame, 94).toDouble();
  final double ain7 = _readUint16LE(frame, 96).toDouble();

  // Gear — not in KPro frame, default 0
  const int gear = 0;

  // Flags
  // SW2 bit2 = MIL
  final bool mil = (sw2 & 0x04) != 0;
  // SW1 bit6 = FLR. Unverified: never live-tested for KPro, and the
  // equivalent S300 bit turned out to be fuel PUMP relay status, not fuel
  // cut, despite an initially plausible-looking name — treat "FLR" the
  // same way until confirmed.
  final bool fuelPump = (sw1 & 0x40) != 0;
  // SW1 bit0 = FANC
  final bool fanOut = (sw1 & 0x01) != 0;
  // SW2 bit1..0 = VTS (VTEC)
  final bool vtec = (sw2 & 0x03) != 0;
  // Knock = KRtrd > 0
  final bool knock = krtrd > 0;
  // Rev limit — not directly mapped in KPro SW; false
  const bool revLimit = false;
  // Launch — not in KPro SW; false
  const bool launch = false;

  return SensorState(
    rpm: rpm,
    vss: vss,
    map: map,
    tps: tps,
    inj: inj,
    ign: ign,
    ect: ect,
    iat: iat,
    bat: bat,
    o2: o2,
    gear: gear,
    eth: eth,
    pa: pa,
    afr: afr,
    strim: strim,
    ltrim: ltrim,
    ain0: ain0,
    ain1: ain1,
    ain2: ain2,
    ain3: ain3,
    ain4: ain4,
    ain5: ain5,
    ain6: ain6,
    ain7: ain7,
    mil: mil,
    fuelPump: fuelPump,
    fanOut: fanOut,
    vtec: vtec,
    knock: knock,
    revLimit: revLimit,
    launch: launch,
    iatError: anyDtcBit(errBytes, kproIatErrorBits),
    ectError: anyDtcBit(errBytes, kproEctErrorBits),
    o2Error: anyDtcBit(errBytes, kproO2ErrorBits),
    errBytes: errBytes,
    timestamp: DateTime.now(),
  );
}

int _readUint16LE(Uint8List frame, int offset) {
  return frame[offset] | (frame[offset + 1] << 8);
}